Açıklama
Product Data
• Safe and reliable full isolation design
• Triac dimmable
• Trailing edge dimming
• Great compatibility with a variety of remote controls
• Innovative minimum brightness setting function
• To dim and switch single color dimmable LED lamps, traditional incandescent and halogen lights
Safety & Warnings
• DO NOT install with power applied to device.
• DO NOT expose the device to moisture.
Operation
Do wiring according to connection diagram.
Pair RF Receiver with RF remote:
1. Connect and wire up the RF receiver correctly, power on.
2. Turn on the remote, click the “Learn” key on receiver, immediately click a zone number to pair the receiver to
the specified zone if the remote is a multi-zone controller (if it is a single zone remote, this step is
unnecessary), then touch the color wheel or slider bar on the remote (if the remote does not have color wheel or
slider bar, click or touch any keys), the connected led light on receiver flickers twice, which means well paired.
Note: one receiver can be paired with max 8 remote controls.
Delete the pairing:
1. Wire up the RF receiver correctly, power on.
2. Hold down the “Learn” key on receiver for over 3 seconds until the connected led light on receiver flickers
twice, which means well deleted
Setting minimum brightness:
Adjust brightness to a level you would like, then click the “Preset key”, once set a minimum brightness, the
light can only be dimmable between this minimum brightness and maximum brightness.
Delete the minimum brightness:
Adjust the brightness to maximum level, then click the “Preset key” to delete the minimum brightness.
